Thick Film Power Ceramic Resistors

Thick Film Power Ceramic Resistors have displayed several key advantages in demanding high voltage situations, including both continuous-wave and pulse applications. These include radar and broadcast transmitters, x-ray systems, defibrillators, lasers, and high voltage semiconductor process equipment applications, where resistors must handle peak voltage anywhere from 20 to 80 kV. Typical applications include current limit in capacitor charge/discharge, crowbar, and tube-arc circuits. In these uses, Thick Film Power Ceramic Resistors provide low inductance, high average power per unit size, stability at high voltage, and durability at extreme peak-power levels.
Features:
◆ rated power: 2.5w-20w

◆ resistance range: 10 Ω ~ 1000m Ω

◆ allowable deviation: ± 1% ～ ± 10%

◆ temperature coefficient: minimum ± 50ppm (25 ℃ ~ 105 ℃)

◆ insulation withstand voltage: > 1000VDC

◆ insulation resistance: ≥ 10g Ω

◆ working temperature range: - 55 ℃ ~ + 225 ℃

◆ maximum working voltage: 48kvdc

◆ inductance: non inductive

◆ connectors: tinned iron cap

◆ resistance installation: Welding

◆ overload: 5p value does not exceed 1.5umax5s, Δ R≤±0.2%R

◆ service life: rated power 1000h, Δ R≤±0.5%R

◆ steady state damp heat: mil-std-202, method 103, condition D, Δ R≤±0.4%R

◆ thermal shock: mil-std-202, method 107, condition C, Δ R≤±0.2%R

Applications:

Motor drive circuits

Snubber circuits

Bleeder

Capacitor charge/discharge

High-frequency circuits

Impulse generators

High-voltage circuits

X-ray equipment

High voltage power supplies

Laser/Imaging equipment

Capacitor charge/discharge

RF dummy loads

Dynamic braking

Transformer protection

For more information ,Please refer to "Thick-Film-Hybrid-Circuit"