Optical Fibre Fusion Splicer Ceramic PCB

The Optical Fibre Fusion Splicer Ceramic PCB can support long-time field work. The real-time compensation system for temperature, humidity and air pressure has greatly enhanced the Optical Fibre Fusion Splicer Thick Film Ceramic PCB against unfavourable environment changes and thus guarantees its consistency of low loss splicing in various environments. Optical Fibre Fusion Splicer Ceramic Resistor PCB has the advantages of high heating power, stable power, fast heating, less heat loss, fast heat conduction speed, power saving, etc

SPEC: Resistane Value : 10 ohm +/-10%

Linearity tolerance: < +/- 1.5% (Laser Trimming

Operating temperature range: 120-180℃

working voltage : 110Vac- 220Vac

Dielectric strength : >1250Vrmas/50Hz/1min

Layers：1 Layer

Thickness: 1.2mm

Material : Alumina ,96%AL2O3 Material

Width/Spacing：5.0/5.0mil

Surface Treatment : Silver coating

Special Process：Carbon resistance

Appilcation：Optical Fibre Fusion Splicer

For more information Please refer to "Thick-Film-Hybrid-Circuit"